Skip to content
Contact Us
  • There are no suggestions because the search field is empty.

indi Care and Cleaning

Why Clean Your indi?

Your indi robot uses a color sensor to read cards and tiles. Frequent handling can transfer oils from your hands, and dust from the environment may accumulate over time. In classrooms, cleaning and disinfecting your robots can help reduce the spread of germs.

Charging contacts in the Class Pack Charging Case may also accumulate dirt, affecting charging performance.

Important Notes:

  • Avoid cleaners with ammonia, acetone, or other harsh chemicals.

  • Do not use disinfecting wipes containing Quaternary Ammonium on the inside of the Charging Case.

  • Alcohol pads (70–90% isopropyl alcohol) are an easy, safe option for cleaning.

Cleaning Your indi Robot

Materials Needed:

  • Isopropyl alcohol (70–90%)

  • Soft, lint-free applicator (microfiber cloth, cotton swab, or paper towel)

Steps:

  1. Turn off indi and disconnect from USB cables. Remove stickers or appliques you don’t want damaged.

  2. Dampen your applicator with isopropyl alcohol (not dripping).

  3. Gently wipe all surfaces, focusing on the color sensor and copper charging contacts.

  4. Avoid the USB charging port and prevent liquid pooling around the power button.

  5. Let indi sit for at least 15 minutes to allow any residual alcohol to evaporate before use or charging.

Cleaning the indi Charging Case

Materials Needed:

  • Isopropyl alcohol (70%)

  • Soft, lint-free applicator (microfiber cloth, cotton swab, or paper towel)

Steps:

  1. Ensure the Charging Case is empty and unplugged. Protect any labels you don’t want damaged.

  2. Remove large debris from slots and inside the lid.

  3. Dampen your applicator and gently wipe all surfaces, paying attention to charging contacts.

  4. Avoid pooling liquid in the slots.

  5. Leave the case open for at least 15 minutes to let the alcohol evaporate before returning robots or reconnecting cables.

Cleaning indi Durable Tiles

Materials Needed:

  • Mild dish soap

  • Warm water

  • Soft applicator (sponge, washcloth, or paper towel)

Steps:

  1. Brush away large dirt or debris.

  2. Gently wipe the surface with soapy water.

  3. For stubborn dirt, soak the tiles in warm, soapy water for a few minutes. Avoid scrubbing.

  4. Pat dry and ensure tiles are completely dry before using or storing.

This guide helps maintain your indi robots, charging cases, and tiles for optimal performance and hygiene.